Out of stock
out of stock
Note: Stock is limited
Availability date: 15-02-2022
Movement speed: 60 mm/s.
Print speed: 20-100mm/s / Nozzle diameter: 0.4 mm.
Positioning accuracy: X/Y 0.0125 mm; Z 0.0020 mm.
Printable materials: PLA, ABS, HIPS, WOOD, TPU.
Print technology: FDM (Fused Deposition Modelling).
Ambient temperature: 8-40 degrees / Maximum extruder temperature: 260 degrees.
Maximum pressure bed temperature: 100 degrees.
Automatic bed leveling through 25 measuring points on the print bed. Real-time calibration with nozzle height compensation.
Print within minutes of unpacking the device.
After a power failure, it is possible to resume the pressure. This increases the success rate of longer prints.
Excellent adhesion and easy component removal after printing.
The pressure will pause if the filament breaks or the coil is empty.
24 V heated bed reaches temperatures up to 100 °C.
Copyright © 2024 Geekmaxi.com. All Rights Reserved.