ATOMSTACK S10 Pro 10W Laser Engraver Cutter, 50W Machine Power, Fixed-Focus, 0.08x0.06mm Compressed Spot, 410x400mm

ATOMSTACK S10 Pro 10W Laser Engraver Cutter, 50W Machine Power, Fixed-Focus, 0.08x0.06mm Compressed Spot, 410x400mm

Dual Compression Spot Technology

ATOMSTACK S10 Pro laser engraver features 50W machine power and 10W laser output power. The ultra-fine laser focus area is reduced to 0.08x0.06mm, so the high-density laser can cut 15 - 20mm thick wood, engrave mirrors, stainless steel metal, ceramics, and glass. The cutting speed is 40% higher than the ordinary model.

Support Offline Engraving

S10 PRO laser engraving machine configures the terminal control panel, supports offline engraving, and with an emergency stop button. After you install the software and upload the file, you can carry out engraving work anytime and anywhere without being restricted by the computer.

High-Performance Fixed-Focus Laser 

The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers. Features automatically fixed focus, the new laser combines precision engraving and high-energy cutting at the same time.

New Filter Panoramic Glass Eye Protection Design

S10 laser engraving with the newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles and could watch the engraving clear.

Smart Limit Switch Design

Limit switches are installed on both X-axis and Y-axis. when the engraving machine stroke is at its maximum, the limit switch will be automatically triggered to protect the laser and avoid a collision.

Wide Compatibility

The ATOMSTACK S10 Pro engraving machine is compatible with various mature engraving software, such as LaserGRBL(Free), and LightBurn(may need to be paid). It supports Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11 and supports Mac system (LightBurn). The engraving file format supports NC, BMP, JPG, PNG, DXF, etc.