SCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard

219,99 €

-30,00 €

249,99 €

  • Using 0.06 mm ultra-fine laser focus, strong cutting ability, high precision engraving, applicable to a variety of materials.
  • Adopts 32-bit motherboard to support 10000mm/min engraving speed.
  • Support cell phone and computer system connection, compatible with a variety of systems.
  • Equipped with smoke filtering system and temperature alarm device to provide a safer and more intimate experience.
  • 130 x 130mm Pattern Engraving Area
  • With semi-open structure design, the engraving object is not limited.

More details

Warehouse: EU 

>
1 2 3 4 5 6 7 8 9 10

Add to wishlist

Description

Reviews

SCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens

Note

1. Because of the powerful laser, it is forbidden to run the engraving machine unattended. Please pause it if you're not around.

2. Please refer to the user manual for detailed machine instructions and parameter settings.

3. Please install the laser protective cover before operating the machine; if not, a pair of goggles is needed.

4. Do not touch the laser with your hands, or it may burn your hands.

5. Please avoid a strong impact on the machine.

6. Children under 14 are not allowed to use this product and children over 14 need adult supervision.

7. Do not apply the laser directly to any specular reflective objects as this may cause injury to the operator or burn the laser.

5W Ultra-fine Laser

iCube Pro uses the 5W diode laser with 0.06mm ultra-fine laser focus. It has strong cutting penetration and engraving precision, which can cut up to 10mm soft board, 6mm Acrylic, and engrave ceramic and stainless steel.

High-Speed Engraving

iCube Pro 5W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed.

With Smoke Filter

Sculpfun iCube laser engraver is equipped with a smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation.

Multiple Connection Methods

The laser engraving machine supports mobile phone and computer system connection. You can connect to the iCube machine via your mobile phone with the Sculpfun APP, or you can connect to the computer with the Bluetooth function or Type-C interface data cable. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system.

Temperature Alarm Function

Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work.

Enclosed Eye Protection Shield

iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye protection shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles.

Engraving Objects without Size Limit

With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 130x130mm which can meet your various engraving demands.

Replaceable Laser Lens

Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power.

Some Important Tips:

1: About the engraving materials:

Note that any specular reflective objects can not be engraved, otherwise, the laser reflection will damage the laser head.

2: About the smoke filter:

A free set of cotton filters is attached with the purchase, it needs to be replaced periodically to ensure the filter effect.

3: About the laser lens:

A free lens is attached to the package with the purchase, which also can be ordered separately.

SCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, SmoSCULPFUN iCube Pro 5W Laser Engraver, 0.06mm Laser Spot, 10000mm/min Engraving Speed, 32-bit Motherboard, Replaceable Lens, Smo

Nobody has posted a review yet
in this language

Rate / write a comment
×
Tips
Remove selected from your cart?
OK Yes No