S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp compressed laser focus spot and 0.01mm engraving accuracy. With super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, 10mm plywood, easily carve ceramics and stainless steel, which is almost beyond the effect of 90W CO2 laser.
SCULPFUN S9 is upgraded with 0.08mm ultra-thin engraving line for precise engraving & cutting. The X-axis and Y-axis have precision scales for quick measurement of engraved objects. The large engraving area of 410x420mm can meet your various engraving needs, he can also be expanded to larger areas, such as 410*950mm.
Laser filter cover can filter 98% of UV light to protect your eyes, no need to wear goggles to watch laser engraving and prevent pets from catching the laser spot. Equipped with a power switch to easily turn on, or turn off the machine in case of emergency. A4 size steel pad protects the table from laser damage and isolates fire hazards.
Compatible various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Engraving materials: wood, paper, cardboard, plastic, PCB board, aluminum oxide, stainless steel, ceramic, stone, etc. Cutting material: wood, acrylic, plywood, fabric, bamboo, plastic board, etc.
Designed for fast installation and long-lasting use. Smart use of fixed focus column allows focus to be adjusted to a fixed position for fast focusing. Anodized aluminum alloy durable structure improves engraving accuracy and service life.
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
●The laser literally burns things. Never leave the product unattended for any period time, and it's worth investing in an automatic fire suppression system like a "fire ball", as well as keeping some sort of water spritzer to hand.
●Keep kids away and always wear laser safety goggles. A low-power laser pointer can cause serious eye damage. If the beam hits a reflective surface, there is a very real chance of permanent eye damage.
●Lastly, fumes. Depending on what you're engraving or cutting, the fumes may either be relatively harmless wood smoke; or toxic from certain types of plastic. It's well worth putting the product inside of a fume extractor cupboard, or sticking it next to an open window with a fan on it.