With the built-in 700W (Surge 1400W) strong inverter and 4 * 110V Pure Sine Wave AC outlets, EB55 is capable of powering most essential appliances for both indoor and outdoor, such as laptop, drone, projector, TV, coffee maker, and more.
The ultra-stable LiFePO4 battery chemistry combines with the built-in Battery Management System (BMS) create multi layers of protection, while offering BLUETTI EB55 solar generator 2500 charge cycles before reaching its 80% capacity.
With 200W AC input 200W PV solar input, this EB55 accepts up to 400W of input power, making it take less than 2 hours to get fully recharged. You can also get the 400W of max power by using dual AC adapters (the 2nd adapter needs bought seperately).
1 * 100W USB-C port is designed for super-fast charging, 1 * Regulated 12V/10A DC car port combined with 2 * 12V/10A DC outputs provide robust power for DC appliances such as mini-fridge, car vacuum cleaner. 4 * 5V/3A USB-A ports and 1 * 15W wireless charging pad are also equipped.
Wall Outlet / Generator: 200W AC Adapter, fully recharged within 3.2 hours. (1-100%)
Solar panel: 200W Max. input (solar panel not included), within 4.5 hours
Car Outlet: 12V port, in 6 hours /24V port, in 3 hours (0-100%)
Recharged by 1*BLUETTI SP200 200W solar panel within 3 hours(0-80%).
Attention: the solar panel sold separately.
Q1: What devices can be charged/powered by BLUETTI EB55?
A: For EB55, the maximum output power is 700W, so please make sure the total power of your devices doesn't exceed 700W, or the inverter will shut down itself.
Friendly Note: For some devices with motor / compressor built inside, the instant start-up power may be 2-4 times more than the rated power, which may exceed the upper limit of the EB55.
Q2: How long will EB55 power my device??
A: Working time (estimation) = 537Wh* 0.85 / operating power of your device. (0.85=Conversion Rate)
Please note that the actual working time may vary under different situations.
Q3: What kind of solar panel can charge this EB55?
A: The solar panel must meet:
1) Open Circuit Voltage (OCV) between 12V-28V;
2) Equipped with MC4 Connector. If your panel has an Anderson connector, please purchase Anderson to MC4 cable, separately.
1*BLUETTI SP200 (200W), fully recharge from 0-100% in 3.5-4 hours.
1*BLUETTI SP120 (120W), fully recharge from 0-100% in 6-6.5 hours.
Friendly Note: The actual charging time depends on the weather, solar condition, and the angle of the solar panels.
Q4: Can it charge and discharge simultaneously?
A: Yes. It is not highly recommended for better battery protection, but with the premium built-in LiFePO4 battery and the advanced Battery Management System, please rest assured and use it the way that better suits your needs. But please note that this unit cannot be used as an UPS.