Out of stock
out of stock
Note: Stock is limited
The power station AC200P is a power monster. you can have most of high-power appliances charged by AC200P, such as fridge, window air conditioner, hairdryers, microwave oven, coffee maker (Max 2000W), CPAP, heater, electric grill, drill, etc. with an insane 2000Wh of energy storage, AC200P gives you the confidence in any emergency. ensure your families are safe with AC200P during unexpected power outages, meet your various power needs.
With a Max 700W solar input allowing full recharge AC200P within 3-3.5 hours. solar charge mode: MPPT. allowing up to 40% faster charging times from the solar panels. 4.5Hrs to fully recharge it by one 500W ac adapter and supports 2.5Hrs by dual ac adapter (need one DC7909 to XT90 cable).You can also fully recharge it by 24V/12V car in about 10Hrs/20Hrs. AC(500W) PV(solar input 700W) recharge AC200P simultaneously in about 2.2Hrs.
Featured with a wide range of output options including 6*AC outlets, 1*12V/25A RV port, 2*15W wireless pad, 1* PD 60W USB-C, 4* USB-A, 1*12V/10A car port and 2* 12V/3A. this All-in-One power station is perfect for use at home, parties, camping, tailgating and as an emergency power back-up.
1)The open circuit voltage of AC200P is between 35V-150V, please make sure solar panels' open circuit voltage is in the range,otherwise it may cause low voltage/overvoltage protection. In addition, considering the loss of solar panels during conversion, the effect of 2 panels is not good. we suggest to connect at least 3pcs Bluetti solar panel in series.
2)The solar panels are NOT included in this listing and can be bought separately.
3)Only one ac adapter is included. For dual ac charging, a second ac charger is sold separately. What’s needed: Second adapter+dc7909 to xt90 cable. The mc4 solar charging cable (mc4 to xt90) is included in the package.
Stability and safety are our top priorities, 3500 super long life cycle. other Highlights:
1) smart touchable LCD screen, real-time display shows current, voltage, power, temperature & Charging Status.
2)Intelligent temperature activated fan-keeps the AC200P cool, fans only activating at 45℃, allowing for a quiet environment especially for CPAP ssers.
3)Our unique “BLUETTI ECO”mode can prevent up to 50% of wasted electricity loss.
Q1:What's the material of the AC200P?
A: Uses PC+ABS 94V0 flame retardant material and aluminum outsourcing TPU for the handle part.
Q2:What kind of the battery chemistry is used?
A:2000WH/2000W, LifePo4 battery cell
Q3:What will be the noisy level?
A:It has a smart fan start-up mode. fans turn on/off based on the internal temperature and the loads. → load<1500W, Max.45dB; load>1500W,Max.54dB
Q4:What is the length of the MC4 cable?
A:There will be a 1.7m MC4 to Aviator cable that comes with the AC200P, and the original cable with the solar panel is 3 meters long.
Q5:Can you charge and discharge this sumultaneously and under what input and output loads?
A:Sure. However, to better protect the cycle life of the battery, it is not recommended to charge and discharge the battery at the same time.
Q6:How long will it take to fully charge by car charging?
A:18 hours under 12V, 9 hours under 24V.
Q7:How much capacity does AC200P have after 3500+ cycles?
A:AC200P can maintain above 80% capacity after 3500+ cycles
Q8:How long will Bluetti run my device?
A:Battery Capacity × DOD × η ÷ (load W) = charging time（unit：h）
Note: DOD is the battery discharge depth, η is the local inverter efficiency AC200P: DOD=90%,η=88%
Q9:What is the surge power of Bluetti AC200P?
A:It can reach up to 4800W max.
Q10:How can the AC200P save move power?
A:The user can customize the ECO mode, and choose to turn it on and off.
Choose eco low power load or no load or forget to shut down, then AC200 will automatically shut down in 4 hours to save power.