BLUETTI Poweroak EP500 5100Wh/2000W Portable Power Station Solar Generator For Camping Outdoor Trip

BLUETTI Poweroak EP500 5100Wh/2000W Portable Power Station Solar Generator For Camping Outdoor Trip

Multiple Devices Can Be Loaded Simultaneously

Traditional lithium batteries can only carry very few devices. Your BLUETTI EP500 is completely different. With 2000W output, the EP500 can load devices simultaneously.

Power outages can happen to anyone, anytime, and they can last days. Small portable batteries are mostly pointless during such times, as they don’t support high-powered appliances, nor will they last very long. To ensure you have power for days, you must have a large capacity battery, such as EP500 Power Station which is engineered with a 5100Wh large battery capacity.

Flexible Recharging Way To Keep Your EP500 Always On

EP500 can be powered by a variety of power sources, including AC charging, solar panels, and so on. This way, you can access the most convenient power sources when you need them.

Peak load Shifting

The EP500 can reduce your electricity bill by helping you manage your power efficiently. For example, you can charge the battery during off-peak hours, when electricity prices are lower. Then during peak hours, use the EP500 for your power needs. When connected to a private power station like a photovoltaic system, you can build a 24/7 operable private power network.

App Control

Monitor, control, and optimize your power usage from anywhere with the BLUETTI app, which offers remote control of power in/out, real-time power consumption notifications, and charging profiles to maximize your battery life. Moreover, you can enjoy the latest firmware update over Wi-Fi directly.

FAQ

Q1: Does EP500 or EP500Pro support split-phase bonding?

A1: No.

Q2: Can I change the working mode of EP500 or EP500Pro to work as a mobile UPS after the EP500 is connected to the home grid?

A2: Yes, you can. Turn off EP500 or EP500Pro first, and then unplug the cable on it, remind to set the Max. Grid Current to 15A.

Q3: What is the UPS switching time?

A3: There are two types of working conditions of UPS for EP500. No delay for online UPS.; 20ms from standby UPS.

Q4: After the stated 6000 battery cycles, how much capacity is left in EP500 and EP500 Pro?

A4: EP500 and EP500 Pro can maintain above 50% capacity after 6000 cycles.

Q5: What should Ido if the solar panels on the roof of my house exceed the open circuit voltage requirement?

A5: You can reduce the open-circuit voltage by ordering a BLUETTI PV Voltage Drop Modular. Doesn't require changing the original installation and connection method of solar panels in your house. Through this modular, the open-circuit voltage of roof panels can be matched with the input specs of EP500/EP500Pro.

Q6: Are there any restrictions on the use of the 100W USB-C port?

A6: The charging power will work at only 60W at most instead of 30W if the USB-C cable does not have 5A MFI certification.

Q7: After the DC port of 12V30A is opened, can the other DC ports be used?

A7: No, for the 30A large-current, the other ports besides 12V/30A RV ports won`t work. In addition, you must cover the rubber plug when the DC is turned on and the 12V/30A port is idle, otherwise, it may cause a short circuit if the cable falls in.