NEJE Master 2S Plus 7.5W 30W Laser Engraver and Cutter N40630 Laser Module 255x420mm Lightburn Bluetooth APP Control 255x420mm

Out of stock

283,00 €

-36,00 €

319,00 €

Warehouse: EU 

Add to wishlist

Description

Reviews

NEJE Master 2S Plus 7.5W 30W Laser Engraver and Cutter N40630 Laser Module 255x420mm Lightburn Bluetooth APP Control 255x420mm

Large Engraving Area 420 x 255 mm

Just fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time.
The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch.

Advanced laser module A40630

Through optical processing, the A40630 module has a small and large divergence angle, can directly engrave stainless steel, and the maximum cutting thickness reaches 18mm. Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.

More materials, clearer

Wood, MDF, leather, paper, cotton, etc. are all supported. The cutting edges are very clean. Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.

32-bit control system &  fastest speed can reach 200,000mm/min

32-bit control system, the fastest speed can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can change it by taking photos with your mobile phone or selecting images from the album To complete the work quickly, NEJE provides free software upgrade services.

Excellent Quality Hardware & Software

The newly engraving tool has been updated to improve the entire machine, designed 30W engraving module and 7.5W output power that can cleanly cut 3mm thick plywood in a pass, the engraving speed can be as high as 1000mm/s, smarter to use and faster speed. It supports GRBL, Lightburn, and NEJE software, APP control for Windows, Mac, and Android to engraving and cutting.

Safety Protection

Safety is always the top priority. The engraving machine comes with a protective panel to block more than 90% of the leaking light and built-in MEMS Roll protection. When the engraving machine is running, the built-in gyroscope will record the working position at the beginning. In the event of an accidental touch or machine shift, the machine will automatically stop working to prevent an accident.

Easy Operation & Nice Results

Mostly pre-assembled as a professional engraving tool, it just required six screws to complete installation. Multi-functional keys can adjust to resetting, frame positioning, starting, and stopping. Smart to use thickness board that can adjust the focus to a fixed position. Higher precision and easier to use. The listing provides how to correct the installation of the machine and download NEJE Software videos. Enjoy your first engraving discovery.

NEJE Master 2S Plus Laser Engraver and Cutter N40630 Laser Module Lightburn Bluetooth APP Control 255x420mmNEJE Master 2S Plus Laser Engraver and Cutter N40630 Laser Module Lightburn Bluetooth APP Control 255x420mmNEJE Master 2S Plus Laser Engraver and Cutter N40630 Laser Module Lightburn Bluetooth APP Control 255x420mmNEJE Master 2S Plus Laser Engraver and Cutter N40630 Laser Module Lightburn Bluetooth APP Control 255x420mmNEJE Master 2S Plus Laser Engraver and Cutter N40630 Laser Module Lightburn Bluetooth APP Control 255x420mm

Nobody has posted a review yet
in this language

Rate / write a comment
×
Tips
Remove selected from your cart?
OK Yes No