The printer's 4 extruder modules and 4-in-1-out hot end deliver 4 types of printings--single color, double color, four color and mixing color, which will greatly enrich your 3D printing experience.One-button switching mode makes monochrome conversion into multi-color easier.
The 3D printer is 70% pre-assembled,boasts a modular design that makes it easier to assemble,and swapping the wires in and out of the extruders a cinch.
Its smart sensor can automatically resume the printing exactly at the same place where it has been stopped after power-off or filament breakage. This function totally drives away the hassle of repetitive and time-consuming printing jobs caused by unexpected power outage.
The newly designed operation interface system greatly improves the user experience,the 4.3 inch TFT-LCD screen makes its operation clearer and simpler.With fast automatic leveling and printing size as large as 300x300x400mm,it can print works that are applicable to various fields.
Metal components, V- profiles, high- wheels, frame structure,rails on each to reduce the noise it produces, more stable, less vibration during printing, higher printing results.
1.Ultra Silent: Working noise is less than 58db (measured at 50cm away from the machine).
2.Power Loss Recovery: Automatic recovery feature.
3.Bed Auto-Leveling feature.
4.Filament Run-Out detects feature/sensor.
5.Auto Power Off: After printed and auto shutdown without operation.
6.Proprietary Cura multi-color printing plug-in: Able to print multi-color 3d prints by mixing colors in the hotend.
7.Built-in automatic color mixing engine: One button to tune gradient, and random color mixing printing.
8.Multi-language menu: One button to switch in 6 languages (RU/EN/ES/PT/FR)(2)
9.Equipped with a high-performance 32-bit control board.
10.Open source firmware.
1. The installation time for our own test is less than 2 hours.
2.The version we sold is Z9V5 Pro.
3.Z9V5 Pro only, LCD12864 needs to upload the firmware to switch to a different language.