Atomstack A70 PRO Laser Engraving Machine, 70W Optical Power, COS Blue Light Laser, 0.01mm Accuracy

Atomstack A70 PRO Laser Engraving Machine, 70W Optical Power, COS Blue Light Laser, 0.01mm Accuracy

Strong Cutting Force

It can cut 18mm acrylic, 12mm MDFM density board, 30mm pine board, and 0.3mm stainless steel sheet.

New Movement Structure

In order to ensure high-speed and stable operation, the machine adopts a new low center of gravity double axis guide rail structure, stable and high-speed silent operation, suitable for heavy engraving and cutting work.

Offline Work

Atomstack A70 PRO is equipped with the second generation intelligent motherboard and control screen, which can get rid of computers and mobile phones and complete work offline.

Standard Large Flow Air Assist

The maximum 60L/min large flow air assist makes the cutting work flawless, and the cutting line surface does not yellow, extending the service life of the laser.

Multiple Use Scenarios

Atomstack A70 PRO can work on reflective metal, ceramic, and black acrylic material, support woodworking creation, painting art, DIY creation, billboard, metal marking, and clothing design.

Fast Accuracy

Under the high-speed operation of 400mm/s, an accuracy of 0.01mm can be maintained.

Dual Mode Focus Length

It supports manual focus and autofocus, and focusing is completed in 8 seconds.

Automatic Flame Alarm

When the flame spot wavelength point in the working area is detected to exceed 35%, the alarm will be triggered and the work will stop an accurate and high speed.

Intelligent Cooling System

Open the double-layer wind shield air-assisted, cutting automatically open air-assisted better heat dissipation, cutting effect is better.

Power Off Continued Carving Function

Power off during the creation, when the call to continue to work unfinished creation.