Out of stock
out of stock
Note: Stock is limited
Availability date:
Low Sensitivity Mode
12V TO 48V AC: No Beep, Green Screen.
48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
High Sensitivity Mode
12V TO 48V AC: Low-frequency beep, The red tip illuminates continuously.
48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
The buzzer will give a slow alarm when the end of the tester is close to the object being tested. The red indicator light flashes slowly and the LCD shows green. Indicates that the tested line is a Null Wire
The buzzer will give a quick warning when the end of the tester is close to the object being measured. The red indicator light flashes quickly and the LCD shows red. This indicates that the line being tested is a live line.
Move the NCV tip of the tester along the wire, if the voltage alert signs disappear, that is most probably the breakpoint.
You can press and hold the “S” button for more than 2 seconds to turn the LED flashlight on/off, and then quickly use it to find problems in the circuit. The LED flashlight provides convenience in a dark environment.
Automatic Power Off after 3 minutes without operation or signal detection.
Rotate the battery cover, remove the battery, and insert the positive terminal of the new battery toward the tip of the tester.
A pocket-sized pen with a hook allows you to carry it in your pocket.
Copyright © 2024 Geekmaxi.com. All Rights Reserved.