Out of stock
out of stock
Note: Stock is limited
Availability date:
This voltage meter can accurately measure AC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity, and Temperature tests. True RMS for accurate measurements on non-linear loads.
If the voltage is> 80 V, the orange display lights up.
The measuring range of AC voltage is 6V/60V/600V. Accuracy: ±(1.0%+3).
The measuring range of DC voltage is 600mV/6V/60V/600V. Accuracy: ±(0.5%+3).
Note:
The voltage value needs to be measured using test leads; the clamp cannot be used directly.
Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformers. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
Non-contact voltage detection effectively check the electrical status by through measuring EM field intensity without touching any wires.
Two-color backlit LCD Display - When the voltage is > 80V, the current is > 3A, the LCD backlit screen turns red to warn you of high voltage.
Press the "Func." button to switch the respective secondary function between the different measurements such as between AC and DC.
Press the "FUNC." key to change the AC or DC voltage measurement.
If no operation in 15 minutes, the meter will beep 3 times, indicating for Auto Power Off; with no further operation in 30 seconds, the meter beeps again and automatically shuts down.
Range: -4°F~1832°F
The K-type thermocouple included
Copyright © 2024 Geekmaxi.com. All Rights Reserved.